Made in America

Tower of Light Systems

Tower of Light Systems feature a proprietary mast guidance system, which provide increased stability during high winds. The manual winch raises and lowers the 6-LED light tower in a controlled manner to any height up to the 32’ maximum elevation point.

Dual power, can be plugged in or powered by a diesel generator with an auxiliary fuel tank for up to 36 hours of continuous use.

Two C-Mor Tower of Light Systems are equivalent to twelve typical light towers.

Tower Specs

The system features a rotating boom which allows for 360° of rotation, a removable light bracket for storage, 4-corner outriggers for stabilization, a manual cord reel for non-generator applications mounted to a box frame with skid pockets for easy transportation.

When fully lowered, the DOT conforming height allows the unit to be transported on a flatbed trailer.

Two units are equivalent to twelve typical light towers.

Straightforward design to accommodate multiple types of job sites, venues & events.

Environmentally friendly

Safety Advantages

C-MOR

Competitors

Increased work site visibility, limiting slips and trips

Increased work site visibility, limiting slips and trips

Increased work site visibility, limiting slips and trips

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Explosion-proof control panel on the ground with on/off switch

Explosion-proof control panel on the ground with on/off switch

Explosion-proof control panel on the ground with on/off switch

Each system, configuration and setup engineer approved and stamped

Each system, configuration and setup engineer approved and stamped

Each system, configuration and setup engineer approved and stamped

Combustion-proof high-efficiency lights

Combustion-proof high-efficiency lights

Combustion-proof high-efficiency lights

The lightest, light system available at under 800 pounds

The lightest, light system available at under 800 pounds

The lightest, light system available at under 800 pounds

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment, which greatly reduces the risk for accidents during setup

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment, which greatly reduces the risk for accidents during setup

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment, which greatly reduces the risk for accidents during setup

Zero spill potential

Zero spill potential

Zero spill potential

Safety Advantages

C-MOR

Competitors

Increased work site visibility, limiting slips and trips

Increased work site visibility, limiting slips and trips

Increased work site visibility, limiting slips and trips

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Explosion-proof control panel on the ground with on/off switch

Explosion-proof control panel on the ground with on/off switch

Explosion-proof control panel on the ground with on/off switch

Each system, configuration and setup engineer approved and stamped

Each system, configuration and setup engineer approved and stamped

Each system, configuration and setup engineer approved and stamped

Combustion-proof high-efficiency lights

Combustion-proof high-efficiency lights

Combustion-proof high-efficiency lights

The lightest, light system available at under 800 pounds

The lightest, light system available at under 800 pounds

The lightest, light system available at under 800 pounds

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment. Such greatly reduces the risk for accidents during setup

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment. Such greatly reduces the risk for accidents during setup

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment. Such greatly reduces the risk for accidents during setup

Zero spill potential

Zero spill potential

Zero spill potential

Download Our Latest Brochure