Our proprietary,
5-year warrantied
LED lights and structure were developed with
SAFETY
as the primary concern.

Made in America

Crown Jewel Lighting System

C-MOR’s patent-pending rig mounted lighting system is a customizable pole mounted assembly which attaches directly to the handrails of the rig crown via secured brackets and backup safety cables.

Driller’s Club Promo!

WEIGHING UNDER 500 POUNDS IT’S THE LIGHTEST, BRIGHTEST RIG MOUNTED SITE LIGHTING SYSTEM THAT EXISTS.

Customizable

Reliable

Green

Safety Advantages

C-MOR

Competitors

Increased work site visibility, limiting slips and trips

Increased work site visibility, limiting slips and trips

Increased work site visibility, limiting slips and trips

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Explosion-proof control panel on the ground with on/off switch

Explosion-proof control panel on the ground with on/off switch

Explosion-proof control panel on the ground with on/off switch

Each system, configuration and setup engineer approved and stamped

Each system, configuration and setup engineer approved and stamped

Each system, configuration and setup engineer approved and stamped

Combustion-proof high-efficiency lights

Combustion-proof high-efficiency lights

Combustion-proof high-efficiency lights

The lightest, light system available at under 500 pounds

The lightest, light system available at under 500 pounds

The lightest, light system available at under 500 pounds

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment, which greatly reduces the risk for accidents during setup

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment, which greatly reduces the risk for accidents during setup

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment, which greatly reduces the risk for accidents during setup

Zero spill potential

Zero spill potential

Zero spill potential

“Unlike most pad site lighting requiring diesel fuel, our lighting system runs off the rig’s power source, significantly improving economics and reducing carbon emissions.”

Safety Advantages

C-MOR

Competitors

Increased work site visibility, limiting slips and trips

Increased work site visibility, limiting slips and trips

Increased work site visibility, limiting slips and trips

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Explosion-proof control panel on the ground with on/off switch

Explosion-proof control panel on the ground with on/off switch

Explosion-proof control panel on the ground with on/off switch

Each system, configuration and setup engineer approved and stamped

Each system, configuration and setup engineer approved and stamped

Each system, configuration and setup engineer approved and stamped

Combustion-proof high-efficiency lights

Combustion-proof high-efficiency lights

Combustion-proof high-efficiency lights

The lightest, light system available at under 500 pounds

The lightest, light system available at under 500 pounds

The lightest, light system available at under 500 pounds

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment. Such greatly reduces the risk for accidents during setup

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment. Such greatly reduces the risk for accidents during setup

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment. Such greatly reduces the risk for accidents during setup

Zero spill potential

Zero spill potential

Zero spill potential

ENVIRONMENTAL AND ECONOMIC ADVANTAGES

Low power consumption requiring no external generator as it plugs directly into the rig power

Reduced project costs, increasing operational hours

Reduced work site noise generation

Reduced CO2 emissions, zero spill potential

Reduced road traffic and dust pollution

Eliminates diesel fuel cold weather gel

Customizable; ability to add or remove lights, poles, and position in the most efficient way possible

Does not have to be taken down or removed while the derrick or other applications are being transported. Designed to be left in place during rig move to improve safety and reduce cost.

Proprietary electrical box that is not light dependent (i.e. if one connection is out, the whole system is not).

Single cable to connect to power source. (i.e. single cable running from crown to ground)

Greater effeciency. The average light tower burns 12-15 gallons of diesel fuel each night. Additionally, they require maintenance, oil, and transport. Our system does away with these, lowering costs and increasing operating efficiency.

5-Year warranty on LED light

Each light is adjustable. The individual pole mounts allow for significant up and down placement as they are not built on a “frame” type design. We can move light poles which support lights up and down to achieve the best possible surface lighting.

ENVIRONMENTAL AND ECONOMIC ADVANTAGES

Low power consumption requiring no external generator as it plugs directly into the rig power

Reduced project costs, increasing operational hours

Reduced work site noise generation

Reduced CO2 emissions, zero spill potential

Reduced road traffic and dust pollution

Eliminates diesel fuel cold weather gel

Customizable; ability to add or remove lights, poles, and position in the most efficient way possible

Does not have to be taken down or removed while the derrick or other applications are being transported. Designed to be left in place during rig move to improve safety and reduce cost.

Proprietary electrical box that is not light dependent (i.e. if one connection is out, the whole system is not).

Single cable to connect to power source. (i.e. single cable running from crown to ground)

Greater effeciency. The average light tower burns 12-15 gallons of diesel fuel each night. Additionally, they require maintenance, oil, and transport. Our system does away with these, lowering costs and increasing operating efficiency.

5-Year warranty on LED light

Each light is adjustable. The individual pole mounts allow for significant up and down placement as they are not built on a “frame” type design. We can move light poles which support lights up and down to achieve the best possible surface lighting.

Download Our Latest Brochure