C-MOR Crown Jewel

Light-weight. Safe. Economic.

C-MOR Tower of Light Systems

CUSTOMIZABLE. RELIABLE. SUPERIOR.

Revolutionary Lighting Systems:
The “Lighter” Light Solution
C-MOR Energy Services
C-MOR Energy Services

Futures are bright when C-Mor lights up the night

WEIGHING UNDER 800 POUNDS, IT IS THE LIGHTEST, BRIGHTEST RIG MOUNTED SITE LIGHTING SYSTEM THAT EXISTS.

Our system uses a proprietary warrantied lighting system engineered for our exact purpose, with individual LED lights angled in specific directions to limit shading and to slow light dissipation.

Our system is simple, but in its simplicity, we are set up to accommodate any style or design of crown section. Savings from light tower rental fees, diesel fuel, maintenance costs and transportation costs are realized immediately after installation.

Two technicians can install in only a few hours. Our systems feature dual powering methods. They can be plugged in or powered by a diesel generator. Two of our systems are the equivalent of 12 standard light towers.

C-MOR TOWER OF LIGHT SYSTEMS

Tower of Light Systems feature a proprietary mast guidance system, which provide increased stability during high winds. The manual winch raises and lowers the 6-LED light tower in a controlled manner to any height up to the 32’ maximum elevation point.

CROWN LIGHTS

C-MOR’s patent-pending rig mounted lighting system, is a customizable pole mounted assembly which mounts directly to the handrails of the Rig Crown via secured brackets and backup safety cables.

ENVIRONMENTAL AND ECONOMIC ADVANTAGES

Low power consumption requiring no external generator as it plugs directly into the rig power

Reduced project costs, increasing operational hours

Reduced work site noise generation

Reduced CO2 emissions, zero spill potential

Reduced road traffic and dust pollution

Eliminates diesel fuel cold weather gel

Customizable; ability to add or remove lights, poles, and position in the most efficient way possible

Does not have to be taken down or removed while the derrick or other applications are being transported. Designed to be left in place during rig move to improve safety and reduce cost.

Proprietary electrical box that is not light dependent (i.e. if one connection is out, the whole system is not).

Single cable to connect to power source. (i.e. single cable running from crown to ground)

Greater effeciency. The average light tower burns 12-15 gallons of diesel fuel each night. Additionally, they require maintenance, oil, and transport. Our system does away with these, lowering costs and increasing operating efficiency.

5-Year warranty on LED light

Each light is adjustable. The individual pole mounts allow for significant up and down placement as they are not built on a “frame” type design. We can move light poles which support lights up and down to achieve the best possible surface lighting.

ENVIRONMENTAL AND ECONOMIC ADVANTAGES

Low power consumption requiring no external generator as it plugs directly into the rig power

Reduced project costs, increasing operational hours

Reduced work site noise generation

Reduced CO2 emissions, zero spill potential

Reduced road traffic and dust pollution

Eliminates diesel fuel cold weather gel

Customizable; ability to add or remove lights, poles, and position in the most efficient way possible

Does not have to be taken down or removed while the derrick or other applications are being transported. Designed to be left in place during rig move to improve safety and reduce cost.

Proprietary electrical box that is not light dependent (i.e. if one connection is out, the whole system is not).

Single cable to connect to power source. (i.e. single cable running from crown to ground)

Greater effeciency. The average light tower burns 12-15 gallons of diesel fuel each night. Additionally, they require maintenance, oil, and transport. Our system does away with these, lowering costs and increasing operating efficiency.

5-Year warranty on LED light

Each light is adjustable. The individual pole mounts allow for significant up and down placement as they are not built on a “frame” type design. We can move light poles which support lights up and down to achieve the best possible surface lighting.

Download Our Latest Brochure

Download

Safety Advantages

C-MOR

Competitors

Increased work site visibility, limiting slips and trips

Increased work site visibility, limiting slips and trips

Increased work site visibility, limiting slips and trips

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Fewer work site traffic obstacles, ideal for tight rig sites/locations

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Three-point connection with backup 250-pound safety cables to each pole and an additional layer of nut/ bolt security via cotter cables

Explosion-proof control panel on the ground with on/off switch

Explosion-proof control panel on the ground with on/off switch

Explosion-proof control panel on the ground with on/off switch

Each system, configuration and setup engineer approved and stamped

Each system, configuration and setup engineer approved and stamped

Each system, configuration and setup engineer approved and stamped

Combustion-proof high-efficiency lights

Combustion-proof high-efficiency lights

Combustion-proof high-efficiency lights

The lightest, light system available at under 800 pounds

The lightest, light system available at under 800 pounds

The lightest, light system available at under 800 pounds

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment. Such greatly reduces the risk for accidents during setup

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment. Such greatly reduces the risk for accidents during setup

No heavy equipment required for rig up or rig down. The lightweight independent pole mounted design allows 2 technicians the ability to complete setup in only a few hours without the use of cranes, or other heavy equipment. Such greatly reduces the risk for accidents during setup

Zero spill potential

Zero spill potential

Zero spill potential

Rental Equipment

  • Storage Units
  • Pressure Washers
  • Living Quarters
  • 3-Sided Tanks
  • Chemical Trailers
  • Flair Boxes
  • Vac Trucks
  • Environmental Vacuums
  • BHA / Pipe Racks
  • Manifolds / Containments
  • Bit Boxes
  • Electrical & Fluid Drive Overs
  • Communications
  • Pre-Mix Tanks
  • Flair Line
  • Pumper Trucks
  • Excavation Equipment
  • Vacuum Boxes
  • Guard Shacks
  • Trailers